US Navy APPROVED (ANU) acoustic diver signaling device with external 18 VDC Battery Pack and YELP and BELL Sound. The O.E. ENTERPRISES DSD-6E Acoustic Diver Signaling Device meets the need for a Quality, NON-EXPLOSIVE, U.S. NAVY APPROVED underwater signaling device for dive operations. It’s portable and affordable and NON-Explosive! Download the information sheet on the DSD-6E.
FEATURES:
- U.S. NAVY APPROVED in Section 004 RECALL DEVICES, 4.1 Recall/One-Way Communicator, Category II,
- Control Number 4.1.4 of DIVING EQUIPMENT AUTHORIZED for NAVY USE. 10560 Ser OOC/3212 of 15 May 1997/Updated 03/18/2004 (ACTIVE).
- For surface vessel, habitat, pool or on-shore operation. Easily transported from site to site.
- USED by EOD, MDSU 1, MDSU 2, NOAA, Deep Submergence Unit, Dive lockers on Nuke Subs and US Army Special Forces Units.
- Long life construction with PVC and epoxy.
- WILL NOT RUST OR CORRODE, even if used in salt water.
- No exposed metal in the water, reducing the potential for electric shock.
- No voice coil to burn out. A NON-EXPLOSIVE Diver Signaling Device.
- Depth capability of 50 feet.
- Range of 200-300 feet (omni-directional transmit pattern).
- State of the art piezoelectric self contained underwater speaker.
- NO receiver required to hear the YELP or BELL Sound underwater!
- Siren electronics are housed within the underwater speaker
No surface electronics to get wet. - Transmit a YELP or BELL sound for Diver Recall.
- ONE YEAR WARRANTY.
- RELIABLE, PORTABLE, AND AFFORDABLE DIVER RECALL for the US NAVY Dive Locker!!
- MADE IN THE USA.
SPECS:
- Depth capability of 50 feet.
- Range of 200-300 feet (omni-directional transmit pattern).
- Waterproof External Attached 18V DC Battery Pack with two 9 volts batteries wired in SERIES.
- Diameter: 6.5 inches.
- Axial Length: 3.8 inches.
- Cable Length: 50 feet.
- Weight: 11 pounds
- National Stock Number (NSN): 6350015727542 Part Number: DSD-6E
- ALARM SET – PERSONNEL — Part Number: DSD-6E
